Tag Archive for 'Tin'

Bottom-up nano- to micro-fabrication is crucial in modern electronics and optics. Conventional multi-scale array fabrication techniques, however, are facing challenges in reconciling the contradiction between the pursuit of better device performance and lowering the fabrication cost and/or energy consumption. Chang et al. introduce a facile mixed-metal array fabrication method based on guided self-assembly of polymerizing organometallic adducts derived from the passivating oxides of a ternary liquid metal to create mixed metal wires. Image credit: Julia Chang.

Researchers Demonstrate New Technique for Self-Assembling Electronics

Dec 5, 2024 by News Staff

The new proof-of-concept work, published in the journal Materials Horizons, paves the way for self-assembling more complex electronic devices without relying...

The Marstrand cannon. Image credit: Bo Niklasson / Bohusläns Museum.

650-Year-Old Shipboard Cannon Found Off Swedish Coast

Sep 21, 2023 by Enrico de Lazaro

Current knowledge concerning the introduction of shipboard artillery in Europe is limited. A small, muzzle-loading cast copper-alloy gun recovered off...

Tin monosulfide nanosheets possess high photon absorption coefficients, allowing them to be used in making ultrathin soft X-ray detectors with high sensitivity and a rapid response time. Image credit: Shabbir et al., doi: 10.1002/adfm.202105038.

World’s Thinnest X-ray Detector Created

Nov 9, 2021 by News Staff

The structural characteristics of biological specimens, such as wet proteins and living cells, can be conveniently probed in their host aqueous media using...

High-precision mass measurements of neutron-deficient indium isotopes with ISOLTRAP: radioactive atoms were produced by nuclear reactions of 1.4 GeV protons impinging on a thick lanthanum carbide target; short-lived indium atoms diffusing from the target were selectively ionized using a two-step laser excitation scheme, provided by the ISOLDE RILIS, which excited one electron above the indium ionization potential (IP); the extracted ion beam was mass separated and injected into a radiofrequency quadrupole (RFQ) ion trap sitting on a high-voltage (HV) platform, where it was bunched and cooled; the beam was then processed by an MR-ToF MS to separate the indium ions from the isobaric contaminants; when the precision Penning trap was used for the mass measurement, further cooling and purification of the beam was achieved using a helium buffer-gas-filled preparation Penning trap; a position-sensitive microchannel plate (MCP) detector was used to record the time of flight and/or the position of the ion after ejection from the precision Penning trap; in the case of indium-99, for which the production yield was too low, the MR-ToF MS was used to perform the mass measurement. Image credit: Mougeot et al., doi: 10.1038/s41567-021-01326-9.

CERN Physicists Measure Masses of Exotic Indium Nuclei

Sep 27, 2021 by News Staff

The isotope tin-100 is of interest for nuclear structure due to its closed-shell proton and neutron configurations. It is also the heaviest nucleus comprising...